Care and Use:

Clean before first use, and as soon as possible after each use. Wash all parts with warm, soapy water. Rinse thoroughly and allow to dry.

This product is leak-proof only when the lid is in the closed and locked position. A worn sipper straw may cause the product to leak. Check straw and replace immediately if damaged or worn.

Straw may be removed for cleaning or replacement as follows:

1.Unscrew lid.
2.Push the button on the sipper lid to open the top.
3.Using your thumbs, push the sipper straw assembly through the bottom of the lid.
4.Pull the inner straw from the bottom of the plastic support disk.
5.Remove rubber straw disk from plastic support disk.
To assemble:
1.Wrap rubber sipper straw edges around the plastic support disk.
2.Push the straw onto plastic support disk. Guide sipper straw assembly into hole in lid. Push firmly into place using inner straw.
3.Fill sippy cup with cold liquid. Securely tighten lid before giving to child.
4.For maximum thermal efficiency, prechill straw bottle prior to use. Fill with cold tap water, attach lid, let stand 5.5 to 10 minutes and empty.

CAUTION

·         For cold liquids only. Hot liquids may cause burns.

·         Always test temperature of liquid before feeding to your child.

·         Dairy or other liquids that spoil easily should not be kept in product for prolonged periods.

·         To avoid possible injury, DO NOT let child walk or run with product.

·         To avoid possible injury, DO NOT let child chew on the soft material of the straw as it may present a choking hazard.

·         Check straw regularly for tears and replace immediately if damaged or worn.

·         Not intended for carbonated beverages as carbonation places product under pressure and may cause product to leak.

·         Never leave child unattended while using this product.

·         Continuous and prolonged sucking of fluids such as fruit juices or flavored sugary drinks may cause tooth decay.